Tripp Lite by Eaton PDUMV20NETLX 1.9kW Single-Phase Switched PDU

Tripp Lite by Eaton
SKU:
6006895
|
UPC:
037332205315
$1,119.79
$1,860.24
(You save $740.45 )
(No reviews yet)
Current Stock:

This product is currently out of stock. To place an order, please contact us at webstore-support@x10technologies.com. Kindly note that fulfillment may take a minimum of 5 business days.

Special Order

The PDUMV20NETLX 1.9kW Single-Phase Switched PDU provides advanced network control and remote power monitoring with the ability to turn on, turn off, reboot or lock out power to each outlet. Recommended for IT and industrial applications, the vertical PDU features 24 switched NEMA 5-15/20R outlets with included cord retention brackets to prevent cables from becoming accidentally disconnected. A 10-foot cord with NEMA L5-20P plug connects the PDU to a compatible AC power source, generator or protected UPS.

The built-in Java-free HTML5-based LX Platform network interface enables full remote access for PDU status monitoring and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported include IPv4, IPv6, HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP.

A digital ammeter allows you to monitor the total load in real time to ensure it remains well below maximum capacity with no danger of overload. The vertical PDU mounts in 0U of space in EIA-standard 19-inch racks using the included toolless mounting buttons or the included rack-mounting brackets. Use the included PDUMVROTATEBRKT kit to install the unit with outlets facing the rear for better airflow or equipment access.

Features

Distributes Network-Grade AC Power

  • 1.9kW 120V switched PDU with single-phase input
  • Recommended for network applications requiring individual outlet control, load shedding and remote monitoring of critical network components
  • NEMA L5-20P plug with 10 ft. cord connects to compatible AC power source
  • Firmware upgrades support future product enhancements

24 Switched NEMA 5-15/20R Outlets Distribute AC Power

  • Individual outlets can be remotely controlled to power up, power down, reboot or lock out devices
  • Cord retention brackets prevent cables from becoming accidentally disconnected

Digital Ammeter

  • Reports total PDU load in real time
  • Supports IP-address self-ID
  • Rotates 180° for easy reading at either angle

Built-In LX Platform Interface

  • Allows full remote access for power monitoring with email notifications via secure web browser, SNMP, telnet or SSH
  • Supports 10/100 Mbps auto-sensing for communication with an Ethernet network
  • Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities
  • No Java required

Broad Communications Compatibility

  • Supports IPv4, IPv6, HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP
  • Supports automatic and manual assignment of IP address

Easy 0U Installation in EIA-Standard 19 in. Racks

  • Vertical PDU mounts using included toolless buttons or rack-mounting brackets
  • Included PDUMVROTATEBRKT allows mounting with rear-facing outlets

TAA-Compliant

  • Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases

More from the Manufacturer

  • PDU provides active metering enabling energy optimization and circuit protection
  • With switched PDU, remotely monitor, connect or disconnect data center loads
Limited Warranty:
2 Year
Manufacturer:
Eaton Corporation
Design:
Modular
Country of Origin:
Taiwan
Input Voltage:
120 V AC
Phase:
Single Phase
Environmentally Friendly:
Yes
TAA Compliant:
Yes
Output Voltage:
120 V AC
Environmental Compliance:
Restriction of Hazardous Substances (RoHS)
Mounting Orientation:
Vertical
PDU Type:
Switched
Receptacle Detail:
24 x NEMA 5-15/20R
Network (RJ-45):
Yes
Input Current:
20 A
Receptacle Type:
NEMA 5-15/20R
Plug/Connector Type:
NEMA L5-20P/5-20P
Remote Outlet Switching:
Yes
Product Model:
PDUMV20NETLX
Package Contents:
  • PDUMV20NETLX 1.9kW Single-Phase Switched PDU
  • Built-in LX Platform Interface
  • NEMA L5-20R to 5-15/20P Plug Adapter
  • Configuration Cable
  • 24 x Cable Ties
  • 2 x Cord Retention Brackets
  • Rack-mount
Management:
  • IPv4
  • IPv6
  • HTTP
  • HTTPS
  • SMTP
  • SNMPv1
  • SNMPv2
  • SNMPv3
  • telnet
  • SSH
  • FTP
  • DHCP
  • NTP
Power Rating (Watt):
1.92 kW
Rack Height:
0U
Manufacturer Website Address:
http://www.eaton.com/EatonCom/Markets/NorthAmerica
Product Type:
PDU
Mount Type:
Rack-mountable