Tripp Lite by Eaton SmartPro 1500RM2U UPS

Tripp Lite by Eaton
SKU:
3954691
|
UPC:
037332119209
$1,225.58
$2,035.46
(You save $809.88 )
(No reviews yet)
Weight:
46.00 KGS
Width:
17.50 (cm)
Height:
3.50 (cm)
Depth:
13.45 (cm)
Current Stock:
Adding to cart… The item has been added

Protects Mission-Critical Rack-Mounted Equipment

  • Provides fully regulated sine wave AC output for servers, network storage devices and telecom hardware
  • Audible alarm signals loss of utility power, overload, low battery and fault conditions
  • 8 NEMA 5-15R outlets
  • 10-ft. (3.05 m) power cord with 120V NEMA 5-15P input
  • 0.9 power factor rating
  • 570-joule surge suppression rating


Reliable Battery Backup

  • Supports half load up to 13 min. and full load up to 4.5 min.
  • Internal batteries designed for hot-swap field replacement
  • 95% line-power efficiency rating saves money in energy costs


2 Load Banks with Switchable Outlets

  • Can control 4 outlets remotely to reboot equipment or shed nonessential loads


Automatic Voltage Regulation (AVR)

  • Maintains 120V nominal output over input range of 83V-147V without using battery power


EMI/RFI Line Noise Filtering

  • Removes electromagnetic and radio frequency interference that can disrupt or damage equipment's performance


Interactive LCD Screen

  • Front-panel LCD signals operating mode, load level, voltage, battery charge and estimated runtimes
  • Rotates for easy viewing in rack-mount or tower configurations


Network Management Cards

  • Compatible with Tripp Lite UPS management card options TLNETCARD, WEBCARDLX, SNMPWEBCARD and RELAYIOCARD


Communications Ports

  • USB & Serial ports enable data-saving unattended shutdown when used with Tripp Lite's PowerAlert software, available via FREE download from
  • EPO">www.tripplite.com/poweralert port supports emergency shutdown in large facilities

  • EPO">
    Versatile Installation Options

  • EPO">
    • Hardware included for 4-post mounting in 2U of EIA-standard 19 in. rack
    • Mounts on wall or 2-post rack with optional 2POSTRMKITWM accessory
    • Mounts in upright tower position with optional 2-9USTAND accessory
  • EPO">

More from the Manufacturer

  • Interactive LCD monitoring screen
  • 13 min. runtime at half load; 4.5 min. at full load
  • 8 NEMA 5-15R outlets-4 switchable via network interface
  • Network power management and control capability
  • Corrects under- and overvoltages from 83V to 147V
Thermal Dissipation:
267 BTU/h
Package Contents:
  • SmartPro 1500RM2U UPS
  • Mounting hardware for 4 post rackmount installation
  • Cabling for USB & DB9 monitoring and EPO switching
  • PowerAlert unattended shutdown and UPS/Power monitoring software
  • Warranty informa
Status Indicators:
LED Indicator
Manufacturer:
Eaton Corporation
Overload Protection:
Yes
Replaceable Battery:
Yes
Battery Chemistry:
Lead Acid
Storage Temperature:
5°F (-15°C) - 122°F (50°C)
Battery Characteristics:
Valve-regulated
Maximum Operating Elevation:
6561.68 ft (2000000 mm)
Sound Emission (A-Weighted):
45 dB(A)
Load Capacity (VA):
1.50 kVA
Backup/Run Time (Half Load):
13 Minute
Environmentally Friendly:
Yes
Packaged Quantity:
1 Each
USB:
Yes
Input Voltage:
110 V AC
Transfer Time:
4 ms
Receptacle Type:
NEMA 5-15R
Output Voltage:
120 V AC
Hot Swappable:
Yes
Plug/Connector Type:
NEMA 5-15P
Product Type:
Line-interactive UPS
Country of Origin:
China
Receptacle Detail:
8 x NEMA 5-15R
DC System Voltage:
36 V DC
Waveform Type:
Sine Wave
Environmental Compliance:
Restriction of Hazardous Substances (RoHS)
Storage Relative Humidity:
0% - 95%
Product Line:
SmartPro
Alarm:
On Battery,Overload,Low Battery
Typical Battery Recharge Time:
4 Hour
Form Factor:
Rack-mountable
Surge Energy Rating:
570 J
Load Capacity (Watt):
1.35 kW
Maximum Operating Temperature:
104°F (40°C)
Limited Warranty:
3 Year
Battery Life:
6 Year
Backup/Run Time (Full Load):
4.50 Minute
Rack Height:
2U
Network Management:
SNMP/Webcard
Manufacturer Website Address:
http://www.eaton.com/EatonCom/Markets/NorthAmerica
Cord Length:
10 ft (3.05 m)