
Tripp Lite by Eaton SmartPro SMART2200RM2UL 2200VA UPS
Tripp Lite by Eaton
$3,051.77
$5,071.10
(You save
$2,019.33
)
Protects Mission-Critical Rack-Mounted Equipment
- Provides fully regulated sine wave AC output for servers, network storage devices, telecom hardware and other applications where long battery lifespan is critical
- Audible alarm signals loss of utility power, overload and low battery
- 4 NEMA 5-15R & 4 NEMA 5-15/20R outlets
- 10-ft. (3.05 m) power cord with 120V NEMA 5-20P input
- 570-joule surge suppression rating
- 0.9 power factor rating
- 97% line-mode efficiency rating saves money in energy costs
- More than 2x the service life
- Up to 3x more charge/discharge cycles
- Recharges to 100% capacity in less than 2 hr.
- Weighs 60% less, reducing overall UPS weight
- Supports half load up to 11.7 min. and full load up to 5.1 min.
- Can control 2 outlets remotely to reboot equipment or shed nonessential loads
- Maintains 120V nominal output over input range of 83V-145V without using battery power
- Removes electromagnetic and radio frequency interference that can disrupt or damage equipment's performance
- Front-panel LCD with detailed UPS and site power status and operating data
- Rotates for easy viewing in rack-mount or tower configurations
- Compatible with Tripp Lite UPS management cards WEBCARDLX, SNMPWEBCARD and RELAYIOCARD
- USB and DB9 ports enable data-saving unattended shutdown when used with Tripp Lite PowerAlert software (available via free download at www.tripplite.com/poweralert
- EPO port supports emergency shutdown in large facilities
- Hardware included for 4-post mounting in 2U of EIA-standard 19 in. rack
- Mounts on wall or 2-post rack with optional 2POSTRMKITWM accessory
- Mounts in upright tower position with optional 2-9USTAND accessory
- ,250,000 Ultimate Lifetime Insurance covers any connected components
- Up to 5.10 minute runtime on full load to preserve critical data from power shortage interruptions
- Prevent critical data loss by staying powered during a blackout with up to 1.92 kW load capacity
- 2.20 kVA load capacity provides sufficient backup during power failures
- Plug/Connector Type:
- NEMA 5-20P
- Manufacturer:
- Eaton Corporation
- Input Voltage:
- 120 V AC
- Circuit Breaker:
- Yes
- Load Capacity (VA):
- 2.20 kVA
- Maximum Operating Temperature:
- 122°F (50°C)
- EMI/RFI Noise Filter:
- Yes
- Phase:
- Single Phase
- Sound Emission (A-Weighted):
- 45 dB(A)
- Environmentally Friendly:
- Yes
- Country of Origin:
- United States
- Serial Port:
- Yes
- Output Voltage:
- 110 V AC,115 V AC,120 V AC
- USB:
- Yes
- Hot Swappable:
- Yes
- Product Type:
- Line-interactive UPS
- Backup/Run Time (Full Load):
- 5.10 Minute
- Limited Warranty:
- 5 Year
- Environmental Compliance:
- Restriction of Hazardous Substances (RoHS)
- Alarm:
- UPS StartUp,Power Failure,Low Battery,Overload,UPS Fault,Remote Shutdown
- Product Line:
- SmartPro
- Form Factor:
- Rack-mountable
- Input Current:
- 16 A
- Surge Energy Rating:
- 570 J
- Waveform Type:
- Pure Sine Wave
- Application/Usage:
- Server,Network Storage Device
- Rack Height:
- 2U
- Transfer Time:
- 5 ms
- Typical Battery Recharge Time:
- 1.40 Hour
- Load Capacity (Watt):
- 1.92 kW
- Receptacle Type:
- NEMA 5-15/20R,NEMA 5-20
- Product Model:
- SMART2200RM2UL
- Manufacturer Website Address:
- http://www.eaton.com/EatonCom/Markets/NorthAmerica
- Backup/Run Time (Half Load):
- 11.70 Minute
- Thermal Dissipation:
- 1343 BTU/h
- Receptacle Detail:
- 4 x NEMA 5-15/20R,4 x NEMA 5-20
- Package Contents:
- SmartPro SMART2200RM2UL 2200VA UPS
- USB cable
- DB9 cable
- EPO cable
- Rack-mounting hardware
- Owner's manual