
StarTech.com 1ft CAT6a Ethernet Cable - 10 Gigabit Category 6a Shielded Snagless 100W PoE Patch Cord - 10GbE Black UL Certified Wiring/TIA
StarTech.comReliable Cat6a 10 Gigabit connections
Each cable is tested for up to 500 MHz frequencyand is more than suitable for 10GBase-T Ethernet networks.
Constructed with 100% copper and foil-shielded, twisted-pair wiring, this cable was built for quality performance.The cable is designed to keep the datasignalstraveling through your network free from interference and is perfect in environments that are prone tolargeamount of EMI.
The 50-micron gold connectors deliver optimum conductivity and eliminate signal loss due to oxidation or corrosion.
Secured network connections
For easier cable runs, the snagless connectors protect the RJ45 clips during installation, making them less likely to snag or break. This ensures a sturdy connection by preventing the cable from becoming loose from the port.
Plus, the molded boots offer strain relief that stops the RJ45 connector termination points from bending at sharp angles, which reduces the risk of damage to the cable that could decrease network performance.
The C6ASPAT1BK is backed by StarTech.com's lifetime warranty for guaranteed reliability.
More from the Manufacturer
- QUALITY CONSTRUCTION: 50-micron gold-plated connectors for clear signal & to stop rust/corrosion. Snagless connector enables easy installation & flexible disconnection of patch cord in wiring conduits
- POE SUPPORT: 26 AWG stranded copper conductors & UL Rated Wiring (E132276-A) supports up to 100W for PoE devices like VOIP phone & security systems. IEEE 802.3bt & DTE power compliant prevents cable heating up
- SPECS: 10 GbE
- Length: 1 ft (0.3 m)
- Color: Black
- Structure: 4 Pair STP
- Connector: Snagless
- Jacket Type: PVC
- Wire Gauge: 26 AWG Copper
- Wiring Standard: ANSI/TIA-568-D
- Warranty: Lifetime
- PROTECT YOUR NETWORK: Shielded RJ45 connectors minimize Near-End Crosstalk (NEXT) & protect against noise & electromagnetic (EMI/RFI) interference compatible w/ multi-speed 10Base-T/NBASE-T generation
- HIGH PERFORMANCE CAT6a Ethernet CABLE: 100% copper for consistent & error-free 10 gigabit connection. Fluke tested complies with ANSI/TIA-568-D Category 6 requirements; ETL Certified Wiring
- Product Type:
- Network Cable
- Device Supported:
- Docking Station,Network Device,Notebook,Desktop Computer,Hub,Switch,Router,Print Server,Patch Panel,PoE-enabled Device,VoIP Device
- Jacket Type:
- CMG
- Connector on Second End Details:
- 1 x RJ-45 Network - Male
- Connector Type on First End:
- RJ-45 Network - Male
- Cable Length:
- 1 ft (0.30 m)
- Connector Type on Second End:
- RJ-45 Network - Male
- Connector Plating:
- Gold
- Connector Gender on First End:
- Male
- Cable Characteristic:
- Patch Cable
- Connector Gender on Second End:
- Male
- Connector on First End Details:
- 1 x RJ-45 Network - Male
- Data Transfer Rate:
- 10 Gbit/s
- Environmentally Friendly:
- Yes
- Product Color:
- Black
- Manufacturer Website Address:
- http://www.startech.com
- Packaged Quantity:
- 1 Each
- Limited Warranty:
- Lifetime
- Color Family:
- Black
- Country of Origin:
- China
- Manufacturer:
- StarTech.com
- Boot Type:
- Snagless
- Cable Type:
- Category 6a
- Features:
- Molded,EMI/RF Protection,Booted,Strain Relief,Corrosion Resistant,Noise Protection,Stranded,Damage Resistant,Minimized Near-End Crosstalk (NEXT),Rust Resistant,Flexible,Break Resistant,PoE
- American Wire Gauge:
- 26 AWG
- Shielding:
- Yes